|
|
| |
|
|
|
|

|

|
Click to enlarge image
|
HS CODE |
8716.80.1000 |
Minimum Order |
5EA |
Lead Time |
45day |
Payment Terms |
T/T in advance |
Electric Golf Trolley
| General Parts Descriptions

| Preparation to start up your Pro Caddy FIRST, unfold your caddy
 |
 |
 |
 |
|
Folded Stage
|
Lift up the lower handle bar
|
Tighten the lower handle bar to the base by pushing down the clamp-as shown. (Tightness can be adjusted with the thumb nut in the front) |
Lift up the upper handle bar then lower the upper bag holder to position
|
| SECOND, complete battery assembly as below
| THIRD, the controls
 |
On/Off Switch : Need to switch on/off to start/stop your caddy.
Battery LED light is on when you switch on your Pro Caddy.
This LED light is green when the battery is fully charged and turns red when the battery needs recharging.
Speed volume label will indicate the speed level of your Pro Caddy. You can set the label at which you feel most comfortable. (For your ref. Pro Caddy can run 6.5km/hr max.)
Make sure this speed volume knob is turned fully anticlockwise.(stop position) before switch-on. The caddy will not operate, if not, even if You switch-on. This is safety feature embedded to prevent sudden start at high speed. So, always switch off & turn it to stop position for restart.
|
| OTHERS
 |
 |
Scoreboard : Simply place the scoreboard on the spots indicated & strongly holed magnets will have it fixed to the handle. |
Easily Removable Rear Wheel : If you need to remove the rear wheel for whatever reason, simply press the key indicated & then the wheel will be removed easily. However, it is not recommended unless it is necessary for a purpose. |
| Electric Golf Trolley Specification
| Model |
Pro Caddy |
| Unfolded |
Length |
1120mm |
| Width |
640mm |
| Height |
920mm |
Folded
|
Length |
780mm |
| Width |
640mm |
| Height |
290mm |
| Weight |
10.5Kg / Without Battery (26Ah : 8.86kg) |
| Tire |
Non-Slip/Soft Rubber-like Compound |
| Max. Speed |
6.5Km/h |
| Power |
DC Motor/12V, 140W |
| Battery |
12V/26AH |
| Charger |
Outboard Charger, Input : 90VAC~132VAC, 47~63Hz, Output : 12VDC/3A for USA/Japan |
| Outboard Charger, Input : 190VAC~264VAC, 47~63Hz, Output : 12VDC/3A for EU/UK/AU |
| Controller |
12V/Variable Speed |
| Characteristic |
→ Handle Folding Type → Aluminum Chassis |
|
|
|
|
| |
|
|
|